Construction

 There are several ways to make levelling pad, for any RE Wall on the excavation pit. You can make a curved levelling pad, straight levelling, one step up-&-one step down etc. But in my case the curve levelling pad is followed, as the RE Wall structure will be in curve position 😂.  And so levelling pad is also made like this, as per the drawing.  Levelling pad is made curved. This is the image of backfill after making the levelling pad.  So levelling pad is made like this. Now the steps to follow to make a levelling pad are as follows :  First you do excavation. And for doing excavation you can read this article.  All steps and process were described briefly. You can do excavation either by JCB or with Falkland also. Since the excavation is large and long, you cannot do by hand-made labors. It will take more time and as well as more economy will also be lose. So to do these type of excavation machinery equipment is used.  After making excavation, ...

 Multiple numbers of designs you can make in 3DS Max. Multiple numbers of designs are available. Interior room design, Exterior design, Office room design, Bedroom design, Living room design etc. and also for furniture's design you can make in 3DS Max. Not only these, many more designs you can make, but to tell it more time will go and will become more complicated. All these types of designs can be make by practicing and practicing more & more.  I have also made various types of designs, such as office room, bedroom, house design interior, house design exterior, also with the modifier tools, such as, sofa design, wall designs, railing designs, column design and many more. It will be going on telling and telling, but nothing could be understand. There's a one type of design, which I have completed in 2 weeks.    It's a office room design and it seems to be simple. But to make this this design it took me so many days. Just to identify it or think it, seems to be si...

  What to do if the excavation pit is waterlogged? Or what are the procedures you have to follow for dewatering the excavation pit? All these things seem to be minor, but actually not so. You have to take a long step to do it, and also have high thinking. You already know, how waterlogging occurs. Due to heavy rainfall or continuous rainfall, the area gets flooded and thus waterlogging occurs. But what happens, if your construction site or the excavation you have done for  RE Wall gets waterlogged? So there are various steps you should have to do as follows:  First of all, you cannot do dewatering directly if you see the water level rising up to the ground surface. You have to wait for some days for the sun to appear and to evaporate it. After that you can bring the water pump to dewater the excavation pit. Since the Sun cannot evaporate all the flooded water at once. It will need days to evaporate it or even a week.  And if the sun appears one-or-two days and again...

 So how to do interior design and which software is more friendly for all those things. You might be thinking about that! So anyhow, all three software's Revit architecture, Google SketchUp, 3ds Max etc. can be possible to make interior designs. But if you want to suggests mine idea then 3DS Max is best. It does not slow down the process and the quality is also elegant. Whatever the sources/ process is required to upgrade your skill & talent.  If you studied my previous blog, you might have gone though my house design in 3ds Max . And here I have given a photo of interior design.  But then also the main question arises why 3DS Max is best. See, I have also used all those Revit, Google SketchUp software. But none of them gives proper value. Means in Revit, sometimes the processor slows down or it takes more time while rendering. But whereas in Google SketchUp, changing the position and fixing in proper place takes more time. Sometimes I feel bore also, by doing this. B...

 Well I have been gone through with all those AutoCAD, Revit architecture, Google SketchUp etc. with all these software. Now I am learning 3DS Max for building architecture and 3D realistic designs. All those Revit and SketchUp doesn't seem amazing for me. It's only just make the design, give 3D elevation, and after that render it. It's like quite simple. So I have been going through with 3DS Max designs, although it's very complex to make, but it seems quite interesting. You have to make the designs part by part and gives nice view while making, then imagine how it will look like after rendering.  So I have been learning now these designs, and it gives me an enormous thinking. I only just try to know how to make these designs fast. For a 10-15 minutes video, it takes me 2-3 hours to make a simple design. Then for 1-2 hrs video just think. How fastly I would have to build up my skills. But I have not found this complexity in Revit. The way I have learnt the designs, it...

So today in this blog I am going to explain how I made an AutoCAD 2D plan and then imported it into Revit software. So you read this blog from starting to end, then only you'll understand clearly.  This is all basic and not any crisscross idea or ruthless situation. It's very simple. First you do all the basic steps in AutoCAD, and you know what is that. Going to Format, set up the units and bla, bla, bla. After that making all these set-up you start with the drawing plan. You yourself have created a idea "how my drawing plan will look like" or "how will I make it?" But before going into complex, first you make a simple drawing plan, like this    First you make the lines and after that create the room size and area of your own. You are exclusively expert in that. This is the first and foremost drawing plan you have to make. And the rest you know how to make it. All boundary lines, room shape and size, passage, staircase etc. you know it very well.  Now you g...