Skip to main content

How to create walls, columns, windows, ventilators in Revit

 Well in the last blog I had discussed about my starting day of Revit Architecture. But here I am going to discussed about creating of walls, Columns, Windows, Ventilators etc. about these. There are also many more others that can be created on Revit Architecture. 

Okk, after bringing the AutoCAD plan to Revit you can start by all of these. Bring the AutoCAD floor plan to the plinth level and start working from there. As you can see in the picture.


After that you can see menu bar, Architecture tab and all those templates. Whatever plan you create see that the floor area matches with the ground area. Well whatever be, in the architecture tab you can see that wall, Door, Window, Component, column, roof and all those other required elements used for house designing are available there. You click on the wall arrow-down button and click on the wall architecture tab. 

Download this image on your computer or laptop screen so that you can view it clearly. After clicking on wall architecture tab, in the properties pallet you can see that many wall options are available. But to get those wall options you should have to click the wall drop-down button. Select the 200mm wall or you can select it according to your requirement. Ans give correct measurements in the wall height box, wall width, also some other requirements also. Create your walls on the wall area and after that click it on the house button above the tab to get the 3D view. 

You can also create columns, windows, ventilators, curtain walls and also many other things available in the architecture tab. But every element have different heights and measurements. You should have to give the offset of your own. 

For column also same thing have to be followed, but while selecting on the column tab select the structural column. After that make it duplicate on the edit button in the properties template and give it any name as you want. So that the required height, width, length you can take of your own. 


By creating all these select the 3D view available on the view tab button and check it out. You can see the actual 3d house you have created. Remember for creating anything you should have to duplicate it first, after that you make it on the plan as you want. And by all these you are ready to complete your house.

Thank you and you can follow me on
Labels:
Location: Duliajan, Assam, India

Comments

Post a Comment

Please do not enter any spam comment.

Popular posts from this blog

How to edit grid systems in Etabs

 Okk in the last blog I had discussed about Etabs for beginners. You have got at least some ideas about it. If you have not seen it then click here . But here I am going to discuss how you will edit Grids/Columns in Etabs. As I had said by clicking on "Modify/Show Grid Systems" option a new dialog box appears, their you can edit anything. But you can also do it by different way. On the left side in grid dimensions (plan) you can see that two options are available. One is "Uniform Grid Spacing" and the other is "Custom Grid Spacing". Click on the "Custom Grid Spacing" and you see that Edit Grid Data option is available. Just click on that, and you can edit it as you want by giving the required dimensions in X-axis and Y-axis only. Ok whatever be lets come to the topic. If you have done it like as I have shown earlier then follow those steps. And the one who were new to this blog this is just for that. That's why I underlined with BLUE line an...
Post a Comment
Read more

How to make 3D Render in Etabs

 Ok, so in the last two blogs I had described about how to make  beams, columns, slabs  and  staircase  in Etabs. But as a beginner for somebody it's easy whereas for someone it's rough to understand or have misconception. If you have not understood or read it then go to the above links and practice it again. And if you have understood then it's good and go forward for the upcoming steps. Because the more you learn, the more you understand. The more you get knowledge, the more you learn new things. So if you want to render like as if I had rendered it then you are on the right website. Just follow the instructions as I have told you.  This is the Rendering view, which I have Rendered. You can also see the 3D View also. After making the complete building structure and modelling all those beams, columns, slabs, staircase etc. you come to the ribbon wizard which is above plan view or 3-D view. You can see a Tick-mark ☑ option which is also known as "Set Displa...
Post a Comment
Read more

How to make Staircase in Etabs

 In the last blog I had described about making beams, columns, slabs/roofs in Etabs. But I forgot to tell you how to make staircase. Apology for that. But today in this blog I am going to discuss how to make staircase in Etabs. So before making Staircase first of all delete one side of the slab by single click. But remember one thing in the story side you should have to click "All Stories" so that automatically all slabs will get deleted and required gap and positioning will be appeared.  First click on All Stories After that select one portion of slab   After that go to Edit menu and click on Delete   Then one part of the slab of each story becomes hollow So doing the following steps you can now make the staircase. As for staircase we need hollow section at the top of it, so that it's free to move. In practical field also you can't provide staircase if the roof is covered with slab. Now the main procedure begins for Etabs.  Go to define tab menu and click on Se...
Post a Comment
Read more