The CONSTRUCTION DOCUMENTARY I saw today.

There are many construction documentaries in the Google or in the You Tube channel. Look through it and watch the following documentary channels which I know. "World Documentary", "Free Documentary", "Welt Documentary", "DW Documentary", "Spark" and many more channels which I know. But I cannot tell them one by one because it never ends. All these documentary channels I found it useful and gives me a huge amount of technological knowledge.

There are many technological knowledge about Bridge, Dam, Stadium, Airport, Ships and many about day-to-day technologies we know today. But for Civil Engineering among the most important are Skyscrapers, Bridges, Dams, Airports, Roads, Rails, Transportation, Buildings and Irrigation which it cannot be justified but never ends. These technologies never ends and it will go on improving day-by-day.

Here I provide you the following links and you watch these channels:-

1. Spark
2. Welt Documentary
3. Free Documentary
4. World Documentary
5. DW Documentary and also many more channels in You Tube where you can learn lots of things.

Today I saw some documentary vedioes and I learnt lots of things. Not today but actually from the last year I love watching these videos. It gives me a huge practical knowledge and also about the struggle of workers they are facing from. Here are some of the photos that I clicked today.

All these works are related to construction fields. After a long time back I am again back ti blogging. I was not well for quite few months. I got an injured on my head and my head was not working properly. From last week I felt relaxed and started began my work again. I will work again and again till the time I get nothing. No matter what happens to me but the article writing must go on.

There are also many new articles I am thinking to write on. But I also think of new ideas to make new articles. Next I will try to give about the basic software skills that every Civil Engineers must know. I will learn those skills and try updating you on this platform. People might fear about their learning. But neither one knows that learning is the most important skill of success and power. You can do anything with power but you cannot succeed without the basic knowledge of learning.

Try watching those vedioes that I mentioned above. Good Luck.

Follow me on the following links:-
Facebook:- https://www.facebook.com/abhijit.patowary.33/
Instagram:- https://www.instagram.com/abhijit.patowary.33/?hl=en

Comments

MACHINES USED AT CONSTRUCTION SITES

The most commonly used machine at any construction site is JCB where it's technical name is Backhoe. It is the most common and widely used machine in any construction project whether its big or small project. It becomes easier and makes the work faster for the companies at any time of interval. All other machines such as Transit Mixer, Concrete Mixer, Roller etc are also used in any kind of road project or building project. Transit Mixer is used for large large building projects, bridge projects, some kind of road projects etc. whereas concrete mixer is for small building projects. Roller is used for road project and bridge project for its elevation. For any building project the most commonly used machines are concrete mixer, transit mixer, concrete pump, bar bending machine, needle vibrator, water pump and many more. All these machinery works make the work easier and faster. Otherwise if the work is done with labourers it will take more time and less efficient ...

How to edit grid systems in Etabs

Okk in the last blog I had discussed about Etabs for beginners. You have got at least some ideas about it. If you have not seen it then click here . But here I am going to discuss how you will edit Grids/Columns in Etabs. As I had said by clicking on "Modify/Show Grid Systems" option a new dialog box appears, their you can edit anything. But you can also do it by different way. On the left side in grid dimensions (plan) you can see that two options are available. One is "Uniform Grid Spacing" and the other is "Custom Grid Spacing". Click on the "Custom Grid Spacing" and you see that Edit Grid Data option is available. Just click on that, and you can edit it as you want by giving the required dimensions in X-axis and Y-axis only. Ok whatever be lets come to the topic. If you have done it like as I have shown earlier then follow those steps. And the one who were new to this blog this is just for that. That's why I underlined with BLUE line an...

Importing AutoCAD into Revit

So today in this blog I am going to explain how I made an AutoCAD 2D plan and then imported it into Revit software. So you read this blog from starting to end, then only you'll understand clearly. This is all basic and not any crisscross idea or ruthless situation. It's very simple. First you do all the basic steps in AutoCAD, and you know what is that. Going to Format, set up the units and bla, bla, bla. After that making all these set-up you start with the drawing plan. You yourself have created a idea "how my drawing plan will look like" or "how will I make it?" But before going into complex, first you make a simple drawing plan, like this First you make the lines and after that create the room size and area of your own. You are exclusively expert in that. This is the first and foremost drawing plan you have to make. And the rest you know how to make it. All boundary lines, room shape and size, passage, staircase etc. you know it very well. Now you g...

Construction

Search This Blog