Skip to main content

NEVER GIVE UP

 Life is a war. You should always have to stand against it. It dosen't matters how difficult situation you have faced or how difficult your life is. The only thing that matters is your achievement and success. Nobody is going to asked you what are the strategies you have failed or how much you worked hard. Only just going to asked you what are the strategies you have applied and your challenges. 

There are always some persons who are going to give you negative points about the work or journey you want to start. While there are some people who are going to advise you to upbringing your life from zero level to hero level. But mind it, beware of fake people. Obviously, the knowledge you learnt, you are going to start your life with that career. 

When you passed your HSLC examination or HS examination, you noticed that nobody has seen your hard work only they asked about the results. But you know how much you have worked hard or how much you acknowledge yourself day and night. So like that in your career nobody is going to asked you how much you worked hard, but everybody is going to see your achievement. 

Be kind, strong and intelligent because civil engineering is that field where lots of people are going to criticized you to default your career. They will always try to underestimate you but never try to upgrade you. So you have to be confident about yourself. Don't give up but try to analyze it. Because analyzing is the important thing that will help to upgrow your career. 

Many persons want to work in a high and rich profile company. But there are some persons who wants to start their career of ownself. They always want to be independent and reach out their goals. So be hardworking and try to achieve your goals. You will see that one day success is coming towards you. You will be really glad and overwhelming. And many people are coming towards you to take your advise about the success of hard work. It will be a pleasurable moment for you. 

There are many such companies, many such divisions, many persons, who worked hard and trying to upbringing themselves in a huge amount. But if I am going to advise them one by one it take a long time and the article will also be long. But in short many persons are going to accommodate high quality work for their achievement. 

Labels:
Location: Duliajan, Assam, India

Comments

Post a Comment

Please do not enter any spam comment.

Popular posts from this blog

MACHINES USED AT CONSTRUCTION SITES

 The most commonly used machine at any construction site is JCB where it's technical name is Backhoe. It is the most common and widely used machine in any construction project whether its big or small project. It becomes easier and makes the work faster for the companies at any time of interval.    All other machines such as Transit Mixer, Concrete Mixer, Roller etc are also used in any kind of road project or building project. Transit Mixer is used for large large building projects, bridge projects, some kind of road projects etc. whereas concrete mixer is for small building projects. Roller is used for road project and bridge project for its elevation.  For any building project the most commonly used machines are concrete mixer, transit mixer, concrete pump, bar bending machine, needle vibrator, water pump and many more. All these machinery works make the work easier and faster. Otherwise if the work is done with labourers it will take more time and less efficient ...
Post a Comment
Read more

How to edit grid systems in Etabs

 Okk in the last blog I had discussed about Etabs for beginners. You have got at least some ideas about it. If you have not seen it then click here . But here I am going to discuss how you will edit Grids/Columns in Etabs. As I had said by clicking on "Modify/Show Grid Systems" option a new dialog box appears, their you can edit anything. But you can also do it by different way. On the left side in grid dimensions (plan) you can see that two options are available. One is "Uniform Grid Spacing" and the other is "Custom Grid Spacing". Click on the "Custom Grid Spacing" and you see that Edit Grid Data option is available. Just click on that, and you can edit it as you want by giving the required dimensions in X-axis and Y-axis only. Ok whatever be lets come to the topic. If you have done it like as I have shown earlier then follow those steps. And the one who were new to this blog this is just for that. That's why I underlined with BLUE line an...
Post a Comment
Read more

How to make 3D Render in Etabs

 Ok, so in the last two blogs I had described about how to make  beams, columns, slabs  and  staircase  in Etabs. But as a beginner for somebody it's easy whereas for someone it's rough to understand or have misconception. If you have not understood or read it then go to the above links and practice it again. And if you have understood then it's good and go forward for the upcoming steps. Because the more you learn, the more you understand. The more you get knowledge, the more you learn new things. So if you want to render like as if I had rendered it then you are on the right website. Just follow the instructions as I have told you.  This is the Rendering view, which I have Rendered. You can also see the 3D View also. After making the complete building structure and modelling all those beams, columns, slabs, staircase etc. you come to the ribbon wizard which is above plan view or 3-D view. You can see a Tick-mark ☑ option which is also known as "Set Displa...
Post a Comment
Read more