Skip to main content

INTERIOR WORKS

 Of course, everybody understands what is interior works and what interior work is basically about. But can you find all the interior work items in one shop while going to the market? Definitely not. Because all shops have different items for housework's. 

There are many interior works in the household items that you have to work for. Just think of electrical works. The items you needed for electrical works can be found in electric shop not in plumbing shop. Same as the case with plumbing items that cannot be found in electrical shop. Also the items needed for woodworks or glassworks can be found in furniture shops. The items needed for bathroom or kitchen work can be found in tiles shop. And various kinds of items needed can be found in different shops. Also for painting works can be found in hardware shops. 

Okk, that's a sort of problem to work about. But what are the interior rooms, or what are the interior materials basically needed?  Well moreover every household person's have 4 interior rooms in common or may be even more i.e., Bedroom, Drawing room, Kitchen cum Dining room, Bathroom etc. And some even more, store room also. 

The materials needed for water closet, materials needed for wash room, kitchen are all that are required for shrinking, washing, etc. But do you know what is the common thing is required for all those bathing, washing, shrinking, cleaning cloths and all those. Yess, guess it; obviously its the water tank where it provides liters and liters of water to all water used works in kitchen and bathroom. 

The most common thing where all rich and poor used in house for their living and without it is not possible to live in dark or night. Yess, you guess the correct thing and it's electricity without which no one can live easily. Because all of these light, fan, TV are now became a lifestyle in every persons life. Wait, but as a Civil Engineer you cannot fit all these things neither you can think about these. All you should maintain is that give the space for electricity work or insert a pipe-hole for wiring work and switch-board work. But now a days everybody use casing for wiring works which looks good and even more attractive. But for some high high building projects lots of wiring are done internally by fitting a pipe hole inside wall and slab. 

And last the most important thing is furniture such as bed, table, rack etc. where it is necessary for every persons house. But who is going to take responsibilities for this. Because you are Civil Engineer and you cannot afford all these things to think of; because you have lots of other projects to do or to think. So the responsibility going to take is the contractor who has got the project to do so. 

So even there are lots of other interior housework items to discuss about. But's all that is not coming to my mind now. Later when I will update my project then I will let you do so. 

Comments

Popular posts from this blog

MACHINES USED AT CONSTRUCTION SITES

 The most commonly used machine at any construction site is JCB where it's technical name is Backhoe. It is the most common and widely used machine in any construction project whether its big or small project. It becomes easier and makes the work faster for the companies at any time of interval.    All other machines such as Transit Mixer, Concrete Mixer, Roller etc are also used in any kind of road project or building project. Transit Mixer is used for large large building projects, bridge projects, some kind of road projects etc. whereas concrete mixer is for small building projects. Roller is used for road project and bridge project for its elevation.  For any building project the most commonly used machines are concrete mixer, transit mixer, concrete pump, bar bending machine, needle vibrator, water pump and many more. All these machinery works make the work easier and faster. Otherwise if the work is done with labourers it will take more time and less efficient ...

How to edit grid systems in Etabs

 Okk in the last blog I had discussed about Etabs for beginners. You have got at least some ideas about it. If you have not seen it then click here . But here I am going to discuss how you will edit Grids/Columns in Etabs. As I had said by clicking on "Modify/Show Grid Systems" option a new dialog box appears, their you can edit anything. But you can also do it by different way. On the left side in grid dimensions (plan) you can see that two options are available. One is "Uniform Grid Spacing" and the other is "Custom Grid Spacing". Click on the "Custom Grid Spacing" and you see that Edit Grid Data option is available. Just click on that, and you can edit it as you want by giving the required dimensions in X-axis and Y-axis only. Ok whatever be lets come to the topic. If you have done it like as I have shown earlier then follow those steps. And the one who were new to this blog this is just for that. That's why I underlined with BLUE line an...

Excavation for RE Wall.

 So, hey guys! How are you? You might have read my previous blogs about panel casting  and panel placing . Now it's time to learn about panel erection or what to do after 3-4 months of casting the panels. So the first step is about excavation for RE Wall. Then only you can erect the panels. So let us learn about this excavation part.  You all know excavation work is done by JCB or Falkland. To excavate the soil and then carry it to the other dumped areas. But before excavation you all know, to marked the center line as well as the outer line also so that the area doesn't excavate much as per the requirement. For excavation just you need to take 500mm more, then that of the given drawing.  Doing this excavation is easy. But what to do if it's flooded with rain water/ or water coming from other sources. Definitely your answer will be to do dewatering work with a water pump. That's fine. But do this dewatering work with almost by fixing 3-4 water pumps. So that it soaks...