THE CONCRETE MIXTURE MACHINE

 For any kind of concrete work whether it is PCC or RCC concrete mixture machine is necessary. Otherwise the work remains default or it dosen't make any progress. So to overcome this defect the concrete machine should be checked properly and it should give a uniform result. 

For any company work whether it is private or government the mixture machine is necessary. As with this machine the work becomes more efficient and easy for the workers. But what happens when the machine gives some problem or it dosen't moves properly. How you will make the mixture or how will you work on that day? So there are some things that you will face some day. Just learn the tricks before.

The most common problem of mixture machine is the handle or the shaft which dosen't moves properly. So you should have to be careful with that. Many works remain undone on the site and the workers also find it difficult to do it. Because they also have pain and ache and therefore rest is also necessary. 

 

In the above images you can see that shuttering is given but the concrete is not poured. Or the shuttering is made but it is kept aside on the site. These are the some problems where the work becomes late and it consumes more time to finish the work. Hand made mixture is strictly prohibited. No hand made mixture should be done in any project or building works. But wait, don't be afraid, because there are some companies where hand-made mixture is used and i.e., only for PCC or rough work. 

Okk, from the above I have talked only about the problems that you face with mixture machine. But there are also some problems that you face with contractors or mistry. And the most common problem is that they don't use vibrators after pouring the concrete in the shuttering. This is the main major problem with the case of mistry where he don't have any technical knowledge and later it leads to honeycomb like structures. It then shrinks, occur cracks and ultimately leads to failure of the structure. 

The work which remains undone is kept like rubbish on the site, the excavation which is not done with JCB is later done by workers with hand made tools, the water which remains on the excavation pit should be cleared out first and all this problems you should have to get rid out of it. 

So to get out rid of this problems you should have to be careful with your work. And tell each and every things to the contractor that you faced on the site. Otherwise this will lead you to tension and stress about the work. To clear out the water from the excavation pit you should have water pump. To make more excavation you have to use JCB. Before making any wood cutting work first you should have to check the limit of the work that is to be done. 

And all this things happens on the site when the concrete mixture dosen't works properly. All the mistry and workers dosen't have any interest to work on the site and they just spend the time just by showing something to work. There is lack of interest in any work.