Construction

  For doing any construction work, first you need to understand the following 9 steps :-  1. Select the plot or land where the construction work will be done.  2. Hire a consultant for the design you want.  3. Make the plan/design.  4. Make the estimate and the cost of budget required to do that work.  5. Take permission from government authorities.  6. Hire a Contractor. 7. Start with Site clearance and levelling.  8. Also go for the Survey work.  9. After that go on for construction process as per the drawing.  Also there includes many more steps after this. But all these steps could not be discussed at once thought. It includes many more do's and don'ts process. But to understand all these terms in briefly you can visit the following websites Construction process 1 , Construction process 2 ,  Construction process 3  & many more sites. Just go and search for "Steps involved in doing Construction work".  BASIC  T...

 So far you all have known that, how RE Wall construction is done and how they are installed. You might have known from the previous blogs. The panels, how are they casted and how the erection work is done. If you have not seen my previous blogs then you will understand nothing. First go and understand these articles by clicking on the link and then only you will understand here briefly.  So, the type of machineries used in RE Walls are as follows :-  Hydra  Dumper  Grader  Roller  Falkland  JCB  Vibrator  HYDRA  Hydra is the most important machinery used in RE Wall. Without hydra, nothing work is possible to do. Because to lift the panels, you will need crane or hydra. After casting for demolding the panels, you will need hydra only and also for panel erection, hydra is only the main aim to lift the panels. So HYDRA is the heart of RE Wall. Without this machine you will have to wait for somedays for work.  DUMPER  Dumper ...